3 Best Condenser Microphones For Podcasting (2019)

Podcasts are all about speaking and if you cannot clearly listen to what is been said, then it totally thumps the purpose. The point to a great podcast is not just abundant content but an equally decent Condenser Microphones will make your content sound proficient.

Best Condenser Microphones For Podcasting

Best Condenser Microphones For Podcasting

With so several microphone models on the market, all claiming to offer you the best podcast experience. Judging the accurate one for your podcast recordings can be pretty annoying. We have provided you the review with a decent research on podcasting microphones. Mainly the research is based on Features, Design, and Performance of the condenser microphones. Research is for you to hand-pick three of the best microphone for podcasting.

3 Best Condenser Microphones For Podcasting (2019)

#1 Audio Technica AT2020USB Condenser Microphones

AT2020 is the cheapest among the three, it still can bring a lot of value to your recording studio. It’s an entry-level mic with professional-level features. It is a condenser mic manufactured by the studio with phantom power and a cardioid recording design. It means this will cut down on annoying noise external to the design. And the great diaphragm is custom-engineered to offer you that extra frequency response.

One nice feature this mic is the flat/roll-off switch. A roll-off is essentially a high-pass filter you can use when you want to put the microphone nearby the source and evade the extra low-end that naturally comes with that. You can start this switch in case there are trucks echoing past on the street outside your studio or a bass amp that’s vibrating the floor.

Design

AT2035, AT2020, and AT2050 look almost closely alike, it is just ever so marginally small in size. The black design is a typical choice for Audio-Technica and it fits them well. Midnight black signifies strength, sturdiness, and reliability. A microphone is secured by a metal case and comes with mic holder. This mic does not have extras like a boom stand or a pop filter. But consider it this way the extra money spent in the actual microphone, the less the company has to also deal extras.

Performance

The AT2020 performs like a star. It works stunningly for vocals, overhead stuff, acoustic guitar, or even brass. The cardioid design is more Omni than stage mics, building it superior for recording. However this mic is so delicate, it will pick up extra noise, like your neighbor’s noise, an air conditioner, or any loud pipes in your house. It is best to use this mic in a sound-proof recording location.

Occasionally this mic is not bright enough and somewhat dull. You can find a better quality mic out there, but you’ll have to pay a lot more for it. You do have to be cautious to not upset out this mic. If you get too close to trumpet, it will overdrive the mic and cause peaking.

Pros

  • Good quality.
  • Adaptable.

Cons

  • Shall set the brightness for some settings.

#2 BluYeti USB Condenser Microphones

An attractive red and orange Blue mic. But its body looks acquainted, it's more costly, smoother than earlier sibling the Blue Bird has the same body time. It has a thin neck, highlighting the short-and-stout cylindrical head. It has a silo-shaped body, contracting at the end where the XLR input exists.

It appears nice, but one shortcoming to it is the durability or lack thereof. Moreover, it is made like a flower it’s beautiful, but you have to take care of it or it may crash. It does come with a nice wooden box that’s protected with protective foam, so you can hoard this thing away with care. It also comes with a custom shock mount as well as a metal pop filter to help cut down on sounds.

Design

Blue is the condenser capsule custom-designed Class A. It means gadget is built for recording a variety of things, like singing or talking, guitar, drums, and pretty much any instrument. However, almost any company can say that about their mic’s condenser capsule.

One feature that is unique to the Blue Spark is something called Focus Control. With this, you can select between Normal mode, which supports increase the low-frequency sensitivity. Additionally Focus mode increases the clarity of your recording. This is similar to roll-off switches and pads that most condenser mics have. But it is different enough that’s it precise to the Spark.

On top of this, the cardioid pickup design supports to block undesirable background noise. This is wonderful for its intended purposes such as spoken word and singing. For instance, if you are recording your podcast, the Focus Control feature and the pickup pattern can help you get better audio. Also, like most condenser microphones, it is phantom powered. It means you shall run this through an audio interface that has phantom power. This way, the mic doesn’t need its own power source.

Performance

Let us speak about the Focus Control feature because that’s what makes this mic stand out. As a matter of fact, it helps you improve the audio quality depending on what you’re recording. When you employ the switch it to Focus mode, you get a roll-off of the lower frequencies at about 100 Hz and some roll-off of higher frequencies. When you shift it to Normal mode, you’ll get a much brighter audio.

Further, you will also notice this mode picks up sounds easier. Selecting the right mode depends on what you’re recording. Overall, the Spark gets pretty good audio quality. Certainly a great buy for beginner and intermediate engineers.

Pros

  • Focus Control feature permits you to alter the sound of your choice.
  • Good audio quality

Cons

  • Durability issue.

#3 MXL990 Condenser Microphones

The MXL 990 has a built-in FET preamp to develop you more oomph and beauty in your audio. It can deal a decently wide range of frequencies, to mean you can preserve the high-end stuff and most of the low-end frequencies. It is phantom powered, hence you will require an audio interface that deals that option. Phantom power permits the mic to receive electricity without it being plugged into a socket. Professionals use phantom power, and it’s what you’ll want as well.

It has a cardioid pickup shape, which is usual and preferable in other vocal mics. When it comes to podcasting, you need a cardioid microphone. It will cut out annoying background noise and essentially capture just your words. Additionally, the metal cage is solid and should do a good job of shielding the fragile interiors of the mic. It does not have any features that are wonderful or unique, hence the advantage of this mic depends totally on its performance.

Design

Visually, the MXL 990 is an attractive microphone. Silver body and cage are designed to offer it an antique look, and it’s finished out of metal, providing it a robust feel. Not only will you sound like a pro, but you will look like one too. If you have a cute looking mic, you will need to preserve it looking nice. Hence it comes with a hardcover protecting carrying case, lined with egg-carton foam.

Inside the case, you will get a silver shock mount and a black plastic mic stands to mount. As for its toughness, this mic weighs in at about 1.5 pounds and nearly a foot tall. Although most podcasters record from one recording space, you may want to take this off-site for interviews, B-roll audio, or to an event. You can rest guaranteed this mic is up to the task.

Performance

The MXL 990 assures silky, sweet vocals, but customers report this is not totally perfect. Audio quality is not as crisp as you would anticipate and a bit bassy, which is not decent for a podcaster to hear. Even though it is not ideal, you can manage this issue with EQ after you’re done the recording.

However, we should not completely write off the quality of this mic. Generally, it will capture good audio for you, good enough for podcasting, especially (but not only) if you’re a beginner. A recommendation is just for two reasons, audio quality, and the price.

Pros

  • Durable
  • Nice audio quality, apt for podcasters.

Cons

  • Need an improvement in Audio quality.

Leave a Comment